How To Fix A Leaky Fireplace Gas Valve. But the cost can go higher up to $2,000 if the leak is in an inaccessible area where excavation is needed. This allows you to quickly be able to turn off the gas in case of an emergency.
If the smell of gas is overwhelming, leave the house immediately and contact your local gas professionals to shut off the gas. See if you can get a box wrench or a socket on the fitting &. Then take a jumper cable, or a piece of 14/12 ga wire with stripped ends, and connect two contacts, where thermopile is attached to the gas valve:
But The Cost Can Go Higher Up To $2,000 If The Leak Is In An Inaccessible Area Where Excavation Is Needed.
I have a fireplace gas valve located in my wall that was leaking only in on position. On the short flexible hose where it connects to that fitting. It does not happen often, but when natural gas does leak, it is extremely dangerous.
On Average, It Costs Between $150 And $800 To Fix A Leaking Gas Fireplace.
Your gas valve must be within 6 feet of your fireplace. Easiest way, is to light the pilot light and wait 5 minutes. Rotate the dial to the “low” point to decrease the fireplace flame.
Once It's Removed, Use A Flashlight To Examine The Valve.
There's a keyed gas shutoff valve in the floor, and whenever we turn it to the open position using a key, we smell gas coming from the hole in the floor where the valve is. Take out the old washer and then install a different one. Gas fireplaces can leak gas and it is very dangerous when it happens.
Looks Like It's The Brass Fitting In The Gas Valve.
We can give you some tips, though, on some basics. Your symptoms of it leaking only when open are pretty common. If flame comes on, it is either bad.
See If You Can Get A Box Wrench Or A Socket On The Fitting &.
If your fireplace won't turn on, it may be a simple matter of the pilot flame having been blown out. Turn on the water to test if the valve still leaks. In order to find out, simply open the vent.
Komentar
Posting Komentar